Fix Cisco AnyConnect Client Connection Issue in Windows 10 10074 Build

5

Ever since I upgraded my Surface to 10074 build I haven’t been able to VPN into my work network. Neither Cisco AnyConnect Security Mobile Client nor Cisco VPN Client worked. While I am still unable to get Cisco VPN Client installed, always prompted with an error 27850 (unable to manage network component), I was able to fix the connection issue on Cisco AnyConnect the other day.

Cisco AnyConnect - Fix Cisco AnyConnect Client Connection Issue in Windows 10 10074 Build

The problem was that every time when I tried to connect via Cisco AnyConnect Client it kept looping through the connection and never made it connect.

The fix is quite simple actually, go to Network Connections from Control Panel, right-click Cisco AnyConnect Security Mobility Client Connection, and choose Properties.

Network Connections - Fix Cisco AnyConnect Client Connection Issue in Windows 10 10074 Build

Then disable IPv6, change IPv4 IP settings from Fixed IP to Dynamic.

Cisco AnyConnect Secure Mobility Client Connection Properties 2015 05 05 14 44 41 - Fix Cisco AnyConnect Client Connection Issue in Windows 10 10074 Build

Close all Network Properties dialog boxes, and try VPN connecting again. It should go through fine now.

Now, I am hoping the next Windows 10 build will fix Cisco VPN Client issue.

5 COMMENTS

  1. HI all,

    while am connectiing to cisco vpn am getting these error plz help me.
    error1:the vpn client failed to establish a connection
    error2:anyconnect was not able to establish a connection to the specified secure gateway.please try connecting again
    those are am geeting on windows 10 Acer laptop
    plz help me need very badly

  2. As per the suggestion , went to Control Panel-> Network and Internet -> Network and sharing center
    But could not find the Cisco AnyConnect secure mobility client connection. Here’s the message ffrom the the cisco anyconnect client ver 4.3.03xxx on Windows10…
    11:47:31 PM Contacting xxx country
    11:47:32 PM Posture Assessment: Required for access
    11:47:32 PM Posture Assessment: Checking for updates…
    11:47:33 PM Posture Assessment: Initiating…
    11:47:36 PM Posture Assessment: Active
    11:47:36 PM Posture Assessment: Initiating…
    11:47:39 PM Hostscan is performing system scan
    11:47:39 PM Hostscan is performing software scan
    11:47:39 PM Hostscan is updating software
    11:47:39 PM Hostscan state idle
    11:47:39 PM Hostscan is waiting for the next scan
    11:47:40 PM Ready to connect.

  3. Correcto muchas gracias por tu ayuda me funciono correcto para Win 7 deshabilitando ipv6 en la conexion de VPN !!!

LEAVE A REPLY

Please enter your comment!
Please enter your name here