There are quite a few reasons why you want to automatically startup and shutdown your Windows machine. You can schedule it to run virus scan periodically when nobody is around, running disk defragmentation or custom downloading tasks. Things like those could take hours to finish. It would be better off to let it run by itself at off hours. An extreme approach to solving this kind of problem is to simply leave the computer on 24/7, and run such tasks while not using the machine. But that might not be an ideal solution; often times, it isn’t doing anything but draining wasted electricity and making unnecessary noise. So if you are using a computer following a predictable pattern, it might be worth it to set up a repeated scheduled job that would automatically power on your machine at a specific time of a day, or a certain day of a week/month, and power off automatically at a predefined time subsequently.
How To Schedule Windows To automatically Startup
To make Windows to power on by itself isn’t something you can achieve inside Windows OS. But you can do this by selecting the right option in your BIOS or CMOS settings. Each machine might have slightly different naming for such configuration. For me, you would first need to go to BIOS > Power Management > Resume By Alarm > Enable. From there you can configure which date of a month to automatically power on or leave it repeated to do this every day at which specific hour of the day. Save the setting when done.
Next Configure Windows to Automatically shutdown
Now that we have configured Windows to start itself, it’s time to configure how to let it shut down at a time of your choice. To do this, we are going to leverage the built-in tool called “Schedule Task”. You can find the setting by going to Control Panel > Schedule Task
On the right side, Action section goes find Create Task …
Under the Create Task wizard make sure “Run whether a user is logged on or not” is selected. Also, make sure “Run with highest privileges” is checked. Give it a name such as “Shut down every night”.
Now go to Actions tab, click New …
This will bring up another pop-up. Select “Start a program” as the action drop down, and under Program/script: enter shutdown
Add arguments (optional): enter -s
Click OK to go back to the wizard. Under Triggers tab click “New …”
At the New Trigger pop-up, you can configure when to execute the action we’ve previously defined. Select Daily and pick the time to shut down the machine. For me, I’ve configured to automatically turn off the computer at 12:15am midnight.
Once you have configured this task, it might ask your password of the user to run this task. Enter the logged in user’s password below.
Now when you go back to the scheduled task wizard, you will find that the task we’ve just created “Shut down every night” is showing under Action Tasks.
That’s it; you’ve just configured your computer to automatically start and shut down all by itself. No more wasted energy on not turning off your computer or too lazy to turn it off. Use this at your own need to start the machine either in the morning or after work, you have the freedom to configure this to fit your lifestyle
Great post!
Two ideas:
With shutdown command, it’s important to use: -f parameter, it forces running applications to close.
And you can also setup the scheduled task with schtasks command.
Extracted from:
http://www.sysadmit.com/2016/09/windows-programar-apagado-o-reinicio-automatico.html
In the post they speak about adding the parameter -s. You are saying you need to add -f.
Can you combine those two and place them like “-s -f” in the “add arguments” field?
Thanks
I’ve done the BIOS thing, but the PC still won’t start up at the required time. Is there anything else I can try?
what kind BIOS settings you’ve tried ? have you tried with more frequency? also worth check if there are BIOS updates for your motherboard
Is this auto startup assuming you put the PC to “Sleep” or is it supposed to start from a total Shutdown or power outage?
It’s via a total shutdown, you can wake up your PC from sleep via a scheduled WOL.
The word is AUTOMATICALLY – not anatomically
Thank you for pointing it out. It’s been corrected. The auto-correct worked quite autonomously. 🙂
You are the greatest!! I’ve worked for months trying to get a smart plug working that was supposed to turn the computer on and off. Your instructions obviated the need for it as my HP computer had that ability itself. Many thanks for your instructions!!